Home › Concrete Demolition and Replacement
We provide commercial concrete demolition and replacement services in Tempe, AZ for deteriorated slabs, pavements, and flatwork. Our team saw cuts and removes damaged sections, then repours new concrete to restore strength and appearance. We minimize disruption to your operations and coordinate phasing when needed. Contact us for an evaluation of your concrete replacement project.
Legendary Concrete Tempe provides professional commercial concrete demolition throughout Tempe, AZ, Arizona and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 480-903-7852 or request your free quote.
Targeted Commercial Concrete Demolition in Tempe
When a concrete slab, parking lot, or loading area in Tempe starts cracking, heaving, or sinking, full replacement is often the only permanent fix. Legendary Concrete Tempe focuses on commercial concrete demolition that removes only what actually needs to go, without disrupting the rest of your property.
We begin with a site walk of your building, lot, or facility. For retail centers and office parks we look at traffic patterns, delivery routes, and tenant access so demolition can be staged without cutting off customers or employees. For industrial and warehouse properties we look at load paths from forklifts and trucks, and check existing slab thickness and reinforcement so we know what equipment and disposal capacity will be needed.
You will get a clear demolition plan that outlines which sections come out, how debris exits the site, and what stays protected. This is especially important in Tempe business parks where access roads are shared and noise must be controlled. Our goal is simple: remove failed concrete quickly, contain dust and rubble, and keep your business operational while the work is underway.
How We Actually Remove Concrete
Commercial concrete is typically thicker and stronger than residential work, so demolition has to be matched to your specific slab. Legendary Concrete Tempe uses a mix of saw cutting, concrete breakers, and skid steer removal so we can separate sections cleanly and avoid damaging adjacent structures.
We usually start by saw cutting the perimeter of the area marked for removal. This creates a clean edge against remaining slabs, curbs, or building foundations, which prevents spider cracking and makes the new pour tie in straight. For interior warehouse slabs with racks in place, we often saw cut in strips between racking rows so work can be phased.
Next, we break the concrete into manageable pieces using hydraulic breakers or jackhammers, sized appropriately so we do not overload your subgrade or underground utilities. On older Tempe properties, we verify utility depths and locations before heavy breaking so we do not disturb shallow conduits or drain lines that were installed decades ago.
Skid steers or loaders then remove the broken concrete and load it into trucks for recycling. We keep debris sorted and the site periodically swept, which matters in active commercial lots where loose rock on asphalt can create liability issues. If we uncover soft spots, voids, or old tree roots under the slab, we flag those immediately so they can be corrected before any new concrete is placed.
Subgrade Correction and Preparing for New Concrete
Many of the commercial concrete failures we see in Tempe are not about the slab mix itself. They are caused by poor base preparation, irrigation leaks, or soil movement from our intense heat and monsoon cycles. When Legendary Concrete Tempe demolishes a slab, we treat it as a chance to fix what was underneath too.
Once the old concrete is removed, we excavate any loose or contaminated material and inspect the subgrade. In parking and drive lanes we proof roll the exposed base, looking for pumping or deflection that indicates weak spots. Those areas are cut out deeper and rebuilt so new concrete will not settle in strips where vehicles travel.
Depending on your use, we install and compact aggregate base to a thickness that supports expected traffic. For light duty commercial parking, 4 inches of compacted ABC over stable native soil may be sufficient. For dumpster pads, delivery truck paths, and loading docks, we typically increase thickness and compaction requirements because these areas see point loads and turning stress.
If drainage has been a recurring problem, we adjust grades at this stage. That can include adding subtle slope away from building entrances, tying into existing catch basins, or creating valley gutters that handle monsoon runoff without ponding near doors or storefronts. Proper preparation here is what lets your new concrete last much longer than the slab you are replacing.
Replacement Options for Commercial Slabs, Parking, and Walks
After demolition and base correction, we design the new concrete to match how your property is actually used. Legendary Concrete Tempe does not use a single mix and thickness for every project. Instead, we match strength, reinforcement, and finish to your traffic and appearance needs.
For typical Tempe commercial parking stalls and drive aisles, we often recommend 4 to 5 inch thick concrete with a 3,000 to 4,000 psi mix and rebar or welded wire mesh reinforcement depending on panel size. For heavy use areas like loading docks, dumpster pads, or fire lane approaches, thickness can increase to 6 inches or more with higher strength mixes or dowelled connections to existing slabs.
Finishes are selected for function and safety. Broom finishes are standard for flatwork where slip resistance is important, such as sidewalks and customer approaches. For storefront approaches or outdoor seating, we can add decorative saw cuts or integral color while still keeping the slab durable and easy to maintain. Around warehouse docks, we often use troweled finishes with a light texture, balancing forklift traction with smooth forklift travel.
We also address joints correctly. Too many failed commercial slabs in Tempe show random cracking because joints were spaced too far apart or not cut deep enough. We lay out control joints to fit panel size and load, then saw cut them at the proper depth and timing to control where the concrete chooses to crack as it cures.
Cost Drivers and Local Considerations in Tempe
Concrete demolition and replacement costs vary, but the reasons are straightforward when you see what goes into the work. At Legendary Concrete Tempe, the main cost factors are slab thickness, reinforcement type, access and staging, disposal volume, and the level of subgrade repair needed.
Thicker, heavily reinforced slabs such as warehouse floors or truck aprons require more cutting, heavier equipment, and additional hauling, which all increase labor and disposal costs. Limited access in downtown Tempe or tight shopping centers can add time because smaller equipment and hand work might be required. If work must happen overnight or in tight windows to keep tenants open, we plan crews around those constraints, which can affect pricing.
Subgrade issues are another major driver. If, after demolition, we find saturated soils from a long term irrigation leak, or poorly compacted fill common in some older Tempe developments, we will recommend remediation before replacing the slab. It costs more up front, but it prevents your new concrete from failing the same way the old slab did. We are direct about these findings and walk you through options so you can decide what makes sense for your property and budget.
We also factor in local weather. Summer heat in Tempe affects scheduling, curing methods, and finishing crews. In extreme temperatures we may place and finish concrete in early morning or night shifts, use curing compounds or coverings to reduce rapid moisture loss, and adjust mixes accordingly. These details protect your investment and reduce the risk of surface defects like plastic shrinkage cracking.
What Tempe Property Managers Should Know Before Hiring
If you manage a shopping center, office complex, industrial facility, or multifamily property in Tempe, there are a few key points to consider before you authorize concrete demolition and replacement. Legendary Concrete Tempe encourages you to look beyond the bid total and check how each contractor plans to handle operations, safety, and long term performance.
Ask how demolition will be phased to maintain access to entries, fire lanes, and ADA routes. We regularly set up temporary pedestrian paths, phased parking closures, and clear signage so customers and tenants can still reach their destinations. A detailed phasing plan protects your revenue and reduces complaints during the project.
Confirm that the contractor will actually evaluate and correct the base, not just pour new concrete over whatever is underneath. Request specifics on compaction methods, base material types, slab thickness, reinforcement, and joint layout. These items impact how long your repairs will last, especially under Tempe traffic and weather conditions.
Finally, understand how communication will work. Commercial concrete demolition is noisy and disruptive if it is not coordinated. We assign a single point of contact who keeps you updated on schedule, areas opening and closing, and any surprises uncovered during demolition. With clear planning and execution, you can replace failing concrete on your property without constant headaches or repeat repairs a few years later.
